| You Need to insert the memory card first, upgrade the latest version of the APP in the WiFi environment, the APP will automatically download the firmware package, prompt to connect to the recorder WiFi, so as to achieve the upgrade of the recorder through the APP. Note: This upgrade is a regular upgrade, and you must connect the power supply during the upgrade process. |
| Card brush: firmware download address and tutorial |
| Http://www.xiaoyi.com/dash/firmware/download/ |
| Equipment requirements |
| 8-32G Class 10 reading 80MB/s microSD card |
| Windows PC |
| USB charging power or charging treasure with charging current greater than 1A |
| First, format the SD card first |
| Please select FAT32 file system and 64KB allocation unit size on the PC. |
| Please select the MS-DOS (FAT) format allocation unit size on the MAC system. |
| Second, the upgrade steps: |
| A. If the Yi Dash Cam-Nightscape can start normally |
| 1. Download the firmware Firmware.bin to the root directory of the SD card and make sure the file name is Firmware.bin. |
| 2. Insert the SD card into the Yi Dash Cam-Nightscape card slot |
| 3. Start the Yi Dash Cam-Nightscape when connected to the power supply |
| 4. The Yi Dash Cam-Nightscape screen will prompt a firmware upgrade. |
| 5. Press the fourth button (power and settings) to select the upgrade. |
| 6. Wait patiently for 1-5 minutes, the Yi Dash Cam-Nightscape will complete the upgrade and restart |
| *Note: Do not turn off or power off during the entire upgrade process. |
| B. If the Yi Dash Cam-Nightscape can not start normally, please try to use the ejector pin to the reset hole on the right side of the fuselage. |
| 1. Download the firmware FWCARC10.bin to the root directory of the SD card and make sure the file name is FWCARC.bin. |
| 2. Insert the SD card into the Yi Dash Cam-Nightscape card slot |
| 3. Connect the power to start the Dash Cam-Nightscape |
| 4. The yellow light in the lower right corner of the Yi Dash Cam-Nightscape flashes, but the screen will not light up (if you don't see the yellow light flashing, please use the paper clip to poke the Reset hole under the USB port on the right side of the fuselage) |
| 5. Wait 1-5 minutes, the Yi Dash Cam-Nightscape will complete the upgrade and start successfully. |
| 6. After the startup is successful, please use the Yi Dash Cam-Nightscape to format the SD card, otherwise the next time you start, you will enter the upgrade process. |
| * Note: Do not turn off or power off during the entire upgrade process. |
Comments
0 comments
Please sign in to leave a comment.